Mechanical Components Division

Enjoy the convenience and flexibility of doing business with only one supplier

Desk Frame 1 (DF1) captures the many benefits of one-stop-shop-ping and is developed to ease your work; From order handling to inventory control. From the initial product design to the final assembly. You can have it all. The way you like it. In one place. This flexibility and convenience not only helps you develop better products – it also helps improve your business

Kick & Click™
• Complete top frame
• Choose between Fixed(for desks of 120 cm) or Adjustable (for desks between 140 and 200 cm)
• Easy assembly: No screws just click the parts together


DESKLIFT™ SetPack
• Complete electric system packed in one box
• Choose between various columns
• Choose between various  desk panels: From simple up-down to sophisticated versions with display and memory

DESKLIFT™ Feet
• Choose between 10 standard versions
• Two lengths available(560 mm or 710 mm)
• For on top or recessed mounting of the column

Desk Frame 2 (DF2), is the intuitive full-frame solution by LINAK® for 2-leg desk designs. It is built around the all-in-one beam containing motor, electronics and cable wiring, and comes with lifting columns in a clean design.

The DF2 is very fast and intuitive to assemble as the few parts are carefully designed to be either clicked together or attached with only a few screws. The DF2 has a clean design. The lifting columns have no visible gliding pads and no punch holes in the profiles, and the internal wiring and pre-installed motor in the beam ensure that only the mains and the desk panel cables are visible. The DF2 is of the well-known LINAK quality and performance similar to other 3-part columns.

As standard, the DF2 features the new anti-collision technology, Desk Sensor™ 1, ensuring that collisions with obstacles do not damage the furniture. The DF2 reuses the existing DESKLIFT™ Feet for mounting the lifting columns either on top of or recessed in the foot construction.

The method of packing ensures optimised logistics. All main components are packed individually and the quantity is aligned.

Hepco’s DLS Belt Driven Linear Actuator will save you hours in design and specifying time. The system comprises of a belt-driven linear actuator, AC motor/ inverter package and a range of compact planetary gearboxes for use with servomotors. Options include a cantilever axis with lightweight beam, plus couplings and connecting shafts for actuators used in parallel.

• Actuators in any length to 8m as standard, and even longer on application.
• Hardened and precision ground linear slide.
• Double row cap sealed bearings for long system life and low maintenance.
• Polyurethane steel-reinforced belt for minimum stretch and high speed capability.
• Quiet, trouble free operation from proven V Guide bearing technology.
• T-nut slots on beam and end boxes allow simple attachment of clamps and switches.
• Removable carriage for secondary machining.
• AC Motor and controller for simple positioning to suit most applicati

The DTS+ is suitable for applications with high loads, a vertical orientation, or where the free space inside the track circuit is required to integrate additional equipment.

The DTS+ system incorporates key features of Hepco’s PRT track system and original DTS, combining them with a high load capacity connection for carriages to the drive belt. The carriages will not disengage from the belt, allowing transmission of higher driving forces compared to the original DTS system. Whilst the original DTS will often be the right choice for many applications, the DTS+ is suitable for applications with high loads, a vertical orientation, or where the free space inside the track circuit is required to integrate additional equipment.

• High strength belt connections allow applications with high speed or high load to be accommodated
• Specially-designed belt-fixing mechanisms connect carriages to the drive belt and do not disengage
• Benefits from low maintenance V guide technology
• Wide choice of system sizes Including 25-351, 44-468, 44-612 and 76-799
• Tracks can incorporate multi carriages that can be locked at workstations for accurate assembly or positioning operations
• Easily incorporated into a multi-function machine as a transfer or positioning system
• Track slides and end segments are fitted to bespoke aluminium sections, the whole assembly can be mounted to your own installation

The DTS2 Driven Track System has been developed for high-speed and dynamic applications.

The DTS2 High Speed Track System has been developed for high-speed applications. The use of a scroll drive allows rapid indexing to be achieved with superior positional accuracy without the risk of carriage disengagement. The track system is available with three sizes of slide section (25mm, 44mm and 76mm).

• DTS2 linked carriages can accept high driving forces.
• Consistent speed of carriages all around the track enables smooth continuous motion to be achieved.
• Higher accelerations can be achieved leading to faster cycle times.
• Available in stainless steel.
• The DTS2 track is configurable in to any shape made from straight and curved sections.